说到顺酐可能很多人不太清楚，听起来有点陌生，今天顺酐生产厂家小编给你详细介绍一下顺酐。

When it comes to maleic anhydride, many people may not be very clear, which sounds a bit unfamiliar. Today, the editor of the maleic anhydride manufacturer will give you a detailed introduction to maleic anhydride.

顺酐全名为顺丁烯二酸酐，又称为马来酸酐，是一种有强烈刺激气味的无色结晶粉末，于1834年初次由苹果酸得到。早期，顺丁烯二酸酐是通过苯的催化氧化制备，但为了降低生产成本，改用正丁烷氧化法制取。

Maleic anhydride, also known as maleic anhydride, is a colorless crystalline powder with a strong pungent odor. It was first obtained from malic acid in 1834. In the early days, maleic anhydride was prepared through the catalytic oxidation of benzene, but in order to reduce production costs, the method of n-butane oxidation was used to produce it.

顺酐由苯经催化氧化或由丁烯或丁烷用空气氧化而制得，溶于乙醇、乙醚和丙酮，难溶于石油醚和四氯化碳，与热水作用而成马来酸；

Maleic anhydride is obtained by catalytic oxidation of benzene or oxidation of butene or butane with air. It is soluble in ethanol, ether, and acetone, but insoluble in petroleum ether and carbon tetrachloride. It reacts with hot water to form maleic acid;

顺酐的外观是白色片状结晶，有粉末状、针状、片状、丸状、棒状、团块状或熔融物质，相对密度是1.480，熔点在52.8℃，沸点是202.2℃，闪点：110.0℃。

The appearance of maleic anhydride is a white crystalline flake, consisting of powder like, needle like, flake like, pellet like, rod like, agglomerate like or molten substances. The relative density is 1.480, the melting point is 52.8 ℃, the boiling point is 202.2 ℃, and the flash point is 110.0 ℃.

顺酐的作用：用于双烯合成、制药物、农药、染料中间体及制聚酯树脂、醇酸树脂、马来酸等有机酸，也用作脂肪和油防腐剂等，生产不饱和聚酯树脂、醇酸树脂、长效碘胺的原料。

The function of maleic anhydride: used in the synthesis of dienes, pharmaceuticals, pesticides, dye intermediates, as well as in the production of organic acids such as polyester resin, alkyd resin, maleic acid, etc. It is also used as a preservative for fats and oils, and as a raw material for the production of unsaturated polyester resin, alkyd resin, and long-acting iodoamine.

也是涂料、马来松香、聚马来酐、顺酐-苯乙烯共聚物的共聚单体，也是生产油墨助剂、造纸助剂、增塑剂、酒石酸、富马酸、四氢呋喃等的有机化工原料。

It is also a comonomer of coatings, maleic rosin, polymaleic anhydride, and maleic anhydride styrene copolymers, and an organic chemical raw material for the production of ink additives, paper making additives, plasticizers, tartaric acid, fumaric acid, tetrahydrofuran, etc.

工业顺酐产品包装一般采用聚丙烯编织袋，内衬聚乙烯塑料袋，应贮存于干燥通风的库房内，防火、防潮、防雨淋、防日晒；在贮存运输过程中勿与酸、碱混放，避免与氧化、腐蚀性物质接触，以免产品变质，运输时注意小心轻放，防止包装袋破损。还有什么事项可以随时来咨询我们http://www.jnjhhg.cn！

Industrial maleic anhydride products are generally packaged in polypropylene woven bags, lined with polyethylene plastic bags, and should be stored in a dry and ventilated warehouse, fireproof, moisture-proof, rainproof, and sun proof; During storage and transportation, do not mix with acids and alkalis, avoid contact with oxidizing and corrosive substances, and avoid product deterioration. During transportation, be careful and handle with care to prevent damage to packaging bags. Feel free to consult us on any other matters http://www.jnjhhg.cn !